Watermark
Menu
Swash Graphic

"Skipjack"

28' Alerion 28 2010

Green Awlgrip topsides with gold cove, red boot and green bottom. Beige non-skid decks with white Gelcoat surfaces and Hall spars painted white to match

Cockpit cushions (seats and backs) in white with dark green piping

Self-draining cockpit

Stainless bow and stern pulpits with double lifelines with cockpit boarding gates

Custom stainless stemhead with welded jib tack and fair lead ring

Freshly Varnished exterior teak: toe rails; cockpit coamings; companionway coaming/trim; housetop handrails; eyebrow; tiller; ensign staff and custom cockpit table; removable cockpit sole boards; cockpit seat coamings and removable magnetic cockpit drink holders

Lexan companionway hatch board and slider

Stainless flag socket with ensign

Custom varnished teak cockpit table with stainless swivel support

(6) Herreshoff-style stainless cleats; deck-mounted chocks forward w S.S. rub strakes and stainless cast chocks cut into the toe rails amidships

Stainless recessed deck drains

Cockpit lockers

Custom tan dodger: leather trim along aft edge and leather covered stainless grab bar; removable clear side panels; large zip open center panel and two removable clear front-facing panels

Tan canvas varnish covers for laminated teak tiller and cockpit coaming boards

Tan full mainsail cover with cutouts and zips for lazy jacks

Pull out emergency boarding ladder at transom, and removable side-boarding swim ladder

Tiller extension

New anchor (stowed)

Safety Equipment including Inflatable Dan-Buoy

Newly installed harness point padeye

Price: $83,500
Boat Name: Skipjack
Make: Alerion
Model: 28
Year: 2010
Condition: Used
Category: Daysailers
Construction: Fiberglass
Length: 28 ft
Display Length: 28 ft
Beam: 8 ft
Max Draft: 4 ft
Fuel Capacity (Gallons): 6
Fuel Type: Diesel
Fresh Water Capacity (Gallons): --
Waterline Measure: --
Max Speed: --
Displacement: --
Number of Engines: 1
City: Alameda
State: California
Country: United States

Seattle Yachts provides access to thousands of boats and yachts available on the market today. These new and used yachts for sale around the world and on the MLS may or may not be listed with Seattle Yachts, however we have the expert team on staff to help you with the purchase of any brand or type of boat.

Seattle Yachts is pleased to present to you Skipjack a 2010 28 listed for sale in CA. While not all of these boats are listed with Seattle Yachts, we do have an expert and professional team of yacht brokers who are committed to representing your best interests in the search, negotiations, and purchase of your next boat or yacht. We would be happy to research this vessel for you and present our findings. This boat is subject to an exclusive listing agreement with Seattle Yachts at location 60000455 and is not offered for sale by Seattle Yachts. Seattle Yachts is merely providing this information in an effort to represent you as a buyer in the purchase of this vessel.

Green Awlgrip topsides with gold cove, red boot and green bottom. Beige non-skid decks with white Gelcoat surfaces and Hall spars painted white to match

Cockpit cushions (seats and backs) in white with dark green piping

Self-draining cockpit

Stainless bow and stern pulpits with double lifelines with cockpit boarding gates

Custom stainless stemhead with welded jib tack and fair lead ring

Freshly Varnished exterior teak: toe rails; cockpit coamings; companionway coaming/trim; housetop handrails; eyebrow; tiller; ensign staff and custom cockpit table; removable cockpit sole boards; cockpit seat coamings and removable magnetic cockpit drink holders

Lexan companionway hatch board and slider

Stainless flag socket with ensign

Custom varnished teak cockpit table with stainless swivel support

(6) Herreshoff-style stainless cleats; deck-mounted chocks forward w S.S. rub strakes and stainless cast chocks cut into the toe rails amidships

Stainless recessed deck drains

Cockpit lockers

Custom tan dodger: leather trim along aft edge and leather covered stainless grab bar; removable clear side panels; large zip open center panel and two removable clear front-facing panels

Tan canvas varnish covers for laminated teak tiller and cockpit coaming boards

Tan full mainsail cover with cutouts and zips for lazy jacks

Pull out emergency boarding ladder at transom, and removable side-boarding swim ladder

Tiller extension

New anchor (stowed)

Safety Equipment including Inflatable Dan-Buoy

Newly installed harness point padeye

Forward of the mast and separated from the salon by a partial bulkhead and curtain is a V-berth with filler and storage beneath and teak shelving outboard and above. The marine head is situated to port beneath a lift out section of the berth. There is a large Lewmar "smoke tinted" Lexan opening hatch in the deck above with screen.

The salon has a full length settee to port with the 12v electrical panel, meter, outlet and bilge pump switch along with the stereo and VHF mounted outboard and aft. To starboard is a built-in single settee with drawer and locker storage forward (for wine glasses and bottles) and aft in lieu of the standard sink and stove. There is also an under-counter storage area aft and to starboard of the companionway. Natural light is provided by (4) elliptical fixed Bomar ports trimmed with teak and by a Lexan companionway slider and hatch board. The exposed hull sides are covered with solid ash planking.


Marine head with holding tank in lieu of standard porta-potty

Dark green Sunbrella cushions with red piping

Oiled teak custom storage rack for cockpit table and companionway hatch board behind companionway 38 qt. cooler/ companionway step with teak and holly lid

(2) Swivel reading lights and (2) overhead dome lights

Vinyl overhead

Custom box trimmed in teak to cover back of nav/sailing instrument port salon

12v panel with (8) circuit breakers; 12v battery charger with Hubbel 110v 30 amp shore power plug and cord (charging only)

Blue Sea Systems 12v meter

Guest rotary battery switch

(2) 12v starting batteries and 12v plug

Mast and chain plates grounded to keel for lightning protection 

Raymarine C90 GPS/Plotter to port of companionway

Raymarine ST60+ sailing instrument; port companionway

Raymarine ST2000+ Tiller Pilot (2017)

Contest Sailing Compass mounted to starboard of companionway

Icom VHF IC-M504 ; port salon with full featured remote for cockpit

Clarion AM/FM Stereo M309 with remote; port salon w cockpit speakers

Steaming light; anchor light; running lights

Sail Inventory:

Roller furling self-tacking North Norlam genoa 95%

North Norlam fully battened main sail with upgraded roller bearing cars on mast track

Rig and Sailing Hardware:

Hall double-spreader mast and boom with Hoyt self-tacking jib-boom (with light air extender)

Harken: roller furling jib; mainsheet led to 4:1 traveler on aft deck

Harken mainsheet swivel block and cam cleat mounted on a barney post in cockpit

Backstay adjuster 8:1 led under aft deck to cockpit

(2) Lewmar 14 stainless self-tailing winches on cabin top

Halyards and genoa sheets led aft through deck-mounted fairleads with clutch stoppers port/stbd. cabin top under dodger

1x19 stainless wire standing rigging with open barrel turnbuckles

Continuous rigged system for easy rig tuning

Custom port and starboard chain plates

Internal main and jib halyards

Spinnaker halyard and track on mast for pole

Lazy-jacks (not currently installed) and single-line reefing for mainsail

Windex

Hall Quick Vang system

Yanmar 2-cyclinder 14 hp inboard diesel with sail drive and 2-bladed folding Gori 15x12LH prop

Hitachi 60A Alternator

Racor fuel filter and water separator; external raw water strainer

Aluminum diesel tank; starboard cockpit locker

Stainless single-lever throttle and shift control

Rule 12v bilge pump with float switch

Manual bilge pump mounted in cockpit

The hull is infusion molded (SCRIMP) GRP with biaxial and unidirectional E-glass re-enforcing fabrics with an end grain balsa core with a Vinylester resin Gelcoat reinforcing layer. Keel floors, keel sump, engine bed, mast step and longitudinal stringers are molded integrally with the hull during the SCRIMP process. Marine grade plywood bulkheads with white, low maintenance laminate and teak trim are bonded to the interior of the hull and deck. 

Resin infused (SCRIMP) GRP sandwich structure with biaxial reinforcing fabrics and end-grain balsa core

Flange-type deck joint bonded with Plexus MA550 adhesive (ABS approved)

Fin with integral bulb for low center of gravity

One-piece lead casting alloyed with antimony bolted to molded keel sump with 304 grade stainless steel bolts

Laminated teak tiller with extension. GRP rudder with stainless steel shaft tube and polished stainless steel rudder head. Balanced spade rudder with elliptical profile and low drag section.

The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.

For more information on this yacht, please contact us.