1979 Custom Longline/Tender/Crabber
The 1979 Custom Longline/Tender/Crabber is currently available for sale in Anchorage Alaska. This boat has a price of $640,000. Our team at Seattle Yachts is here to help you find the right boat for your needs, budget, and style. We have access to boats off the market that will never be seen online, so contact us today with your interest.
Price: $640,000
SPECIFICATIONS
Price: | $640,000 |
Boat Name: | -- |
Make: | Custom |
Model: | Longline/Tender/Crabber |
Year: | 1979 |
Condition: | Used |
Category: | Other |
Construction: | Steel |
Length: | 66 ft |
Display Length: | 66 ft |
Beam: | 19 ft in |
Max Draft: | -- |
Min Draft: | -- |
Fuel Capacity (Gallons): | -- |
Fuel Type: | Diesel |
Fresh Water Capacity (Gallons): | -- |
Max Speed: | -- |
Displacement: | -- |
Number of Engines: | 1 |
Engine Make | Cummins |
Engine Model | K19 |
Engine Power | 0.00 HP |
City: | Anchorage |
State: | Alaska |
Country: | United States |
MORE INFO
Tender Contract:
Has an amazing tender contract in Bristol bay message me for details. 503-730-0842
Comes with a transvac fish pump for tendering,
VESSEL TYPE:
66’ steel longliner/ tender/ crabber
MAIN ENGINE:
Make/Model: K19 Cummins
Hours: 22,000 hours
GENERATORS:
45kw John Deere generator
Hours: 35,000 hours
65kw John Deere generator
Hours: 0 hours (NEW)
REFRIGERATED SEA WATER (RSW):
Capacity: 26-ton Cold Seas RSW
Year: New in 2022
LONGLINE GEAR:
Includes:
Longline house
24” Kolestrand longline hauler
Morse controls
100 skates of stuck longline gear (very new)
ANCHORS:
Quantity: 16 anchors
POTS AND GROUND LINE:
300 7mm slinky pots
300 Dungy pots
4 door trilogy (new in 2022)
FISHING CAPACITY:
Packs 110,000 salmon
ENGINE SPECIFICATIONS:
Make/Model: Cummins KTA19; 500 HP.
Type: Diesel, inline 6-cylinder, four-cycle, turbocharged, aftercooled.
Serial #: Not seen.
Tach Gauge Hours: 12,539 hrs. (installed new 2000).
Exhaust: Dry; stainless steel vertical pipe; well lagged & wrapped.
Cooling: Keel cooled.
Transmission: Twin Disc MG 516; ratio 4.5 : 1; s/n: 3AF-403.
Ventilation: Passive through engine room vents.
Safety Alarms: Harris Electric low oil pressure, high water temperature, low water level.
Drive: (1) 54” x 40” bronze Coolidge four-blade propeller, driven on a 20’ long 4” stainless steel shaft with a 4” cold-rolled iron intermediate shaft. (1) spare 56” x 40” bronze propeller.
ADDITIONAL DETAILS:
VESSEL TYPE: Commercial fishing vessel
POWER: Single diesel inboard with propeller
HULL TYPE: Steel "whaleback" displacement monohull
OWNER: Howard Maki
HAILING PORT: Cordova, AK
WATERS NAVIGATED: Ketchikan, AK to Unimak Pass, AK, including the Gulf of Alaska.
BUILDER: Not provided
BUILDER LOCATION: Fort Bragg, CA
YEAR BUILT: 1979
TONNAGE: 83 gross / 57 net
LENGTH OVERALL: 66 feet
REGISTERED LENGTH: 59.8 feet
BEAM: 19 feet
DEPTH: 9.7 feet
DRAFT: Approximately 8 feet
CRUISING SPEED: Reportedly 9 knots @ 1600 RPM (cruise)
FUEL CONSUMPTION: Reportedly 10 GPH @ cruise
Seattle Yachts is pleased to assist you in the purchase of this vessel. This boat is centrally listed by W S Yacht Brokers. It is offered as a convenience by this broker/dealer to its clients and is not intended to convey direct representation of a particular vessel
Disclaimer
The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.
Listing MLS by Yachtr.com
SIMILAR BOATS